PRG V676 User Manual 3.5 - Manual (Page 352)

334 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Automatic Display Filtering
When active, the automatic display filtering feature will display data for only the selected
channel(s). This is effective for all status and data windows.
To enable display filtering:
Step 1. At front panel, press [Auto Display Filter] toggle button (button will flash) or at
Special menu, select Auto Display Filter. (A check will appear in menu when
active.)
Step 2. Select desired channel(s). Status and data windows will now show information
for only the selected channel(s).
Auto Display Filter
Toggle Button