PRG V676 User Manual 3.5 - Manual (Page 366)

348 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Tools
Controls are available in the tool bar at the top of the window:
Modes
While in Channel Select Mode, the following options are available:
+ Click on individual luminaires to select for manual control.
+ Hold down left trackpad button and drag cursor across a range of luminaires to select for manual control.
While in Camera Angle Mode, the following options are available:
+ Hold down left trackpad button while using trackpad to move camera angle up/down or right/left. (Whichever
direction you move first will lock the graphic into either the up/down or right/left mode. Release button and press
again to move graphic in a different direction.)
+ Hold down left trackpad button and ALT key while using trackpad to zoom in or out.
+ Hold down left trackpad button and SHIFT key while using trackpad to rotate venue.
+ Hold down left trackpad button and WIN key to bring up camera focus cross hairs. Clicking somewhere within the
graphic with these cross hairs will refocus the camera angle to that center point.
When the Center Lines Mode is selected, the lines (beam representations) will change color according to intensity
states. The following color code applies:
+ Black - Out
+ White - Full
+ Red - Zero
+ Green - Marked
Quick Keys
The following "quick keys" can be used with the 3D Graphic window:
left arrow 3D rotate camera left 2 move venue down (camera up)
right arrow 3D rotate camera right 4 move venue left (camera right)
up arrow 3D rotate camera up 6 move venue right (camera left)
down arrow 3D rotate camera down 8 move venue up (camera down)
SHIFT / left arrow move venue left relative to camera 7 move venue forward (camera back)
SHIFT / right arrow move venue right relative to camera 9 move venue back (camera forward)
SHIFT / up arrow move camera in
SHIFT / down arrow move camera out
Center Lines
Pools
Cones
Select or add camera
angle presets
Luminaires
Point of Interest Mode - Brings up
crosshairs for refocusing luminaire beams.
Channel Select Mode - Allows
selection of individual channels
or channel ranges.
Camera Angel Mode - Allows
manipulation of camera angle
view of scene.