PRG V676 User Manual 3.5 - Manual (Page 330)

312 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Dynamic Disable
The Dynamic Disable feature disables the playback of any macros and/or snapshots linked to a cue. For example, if
you wish to view data in a particular cue, you could disable any linked event(s) so that it will not occur upon
completion of the cue.
To set Dynamic Disable mode using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Select

Dynamic Disable

checkbox.
Step 3. Press

Close

to close Setup screen.
To release a submaster from Dynamic Disable mode using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Deselect

Dynamic Disable

checkbox or press

Clear

to clear all submaster settings.
Step 3. Press

Close

to close Setup screen.
Modes