PRG V676 User Manual 3.5 - Manual (Page 356)

338 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
OFF-LINE PROGRAMMING
Performing Off-Line Programming
The Off-Line feature allows preprogramming without having to connect to a system. When in the Off-Line mode, all
menus and windows are accessible just as if the system were on-line. The only difference is found in the System
Configuration window, which will display errors for any of the previously connected system devices.
Set console to Off-Line mode:
+ At Vx76 menu, select Offline.
When in Off-Line mode, indications will appear in the System Configuration window,
status bar, and command-line display as shown below:
Note: While the system is Off-Line, the Live/Preview modes will not be available. When an off-line console is brought
on-line, the Live mode will be restored by default, even if the console was previously in Preview mode.