PRG V676 User Manual 3.5 - Manual (Page 196)

178 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Step 6. Randomize the dynamic by applying a fan:
a. Open Function Filter by pressing "filter" in central touchscreen.
b. Select parameter(s) to fan.
c. Press

fan mode

button to choose fan type: Left fan, Right fan, Center fan, Ends fan, and Tilt fan.
d. Press and hold [Fan] button while turning an encoder. (Refer to "Fan" on page 92 for more detailed
information.) The dynamic should become more random as the fan is applied.
Double-clicking the [Fan] button will latch the encoder fan mode on (LED will flash). Double-click again to
turn the fan mode off.
Note: Dynamics stored in the palette will NOT retain Fanned Offset settings.
Step 7. Pile-on more canned dynamics by selecting more items in palette or stop all dynamics by pressing

Stop
All

button.
Step 8. To store a dynamic as a cue or preset, refer to "Storing Dynamics in Cues/Presets" on page 182.
Tip
1 2 4 3 5 8 6 7 9 10
11 12 14 13 15 18 16 17 19 20
Fan Effect Frame Image
Slow 3D Beam
Shift Grid Dynam Color
B
F
Fan Button
Fan Mode Button
Mode Options