PRG V676 User Manual 3.5 - Manual (Page 377)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 359
Cleanup Palette
This command can be used to remove any occurrences of "Unk" fixture types in the palette window which may have
happened during a data import.
To cleanup a palette:
Step 1. To enable Cleanup Palette command, ensure that either palette data window is open
and at top level (in front of all other windows).
Step 2. At Data menu, select Cleanup Palette. This will bring up a confirmation alert.
Step 3. At alert window, click Cleanup. This action will remove "Unk" fixture types.
Revert to Defaults
This command can be used to delete bad palette data and duplicate fixture types. This will restore defaults from the
profile (if present) for the selected fixture.
To revert to defaults:
Step 1. To enable Revert to Defaults command, ensure that either palette data window is open and at top level (in
front of all other windows) and a fixture type is selected in palette window.
Step 2. At Data menu, select Revert to Defaults. This will bring up a confirmation alert.
Step 3. At alert window, click Revert. (Palette data may need to be recreated.)
Unknown
Fixture Type
Selected Fixture