PRG V676 User Manual 3.5 - Manual (Page 212)

194 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Like other palette items (Color, Beam, Group, etc.) effects are given a discrete number. Once stored, they can be
accessed in the command line or in the Effects palette. Refer to
"Working with Palettes" on page 128 for more
information.
What is a Set?
A set consists of one or more parts. Parts are made up of specified channels (luminaire groups) with the limitation
that a channel may only appear once within the set.
The following diagram shows an example set consisting of four parts:
Set 0 (Default Set)
One pre-programmed set is available, which contains all patched channels as a single part. This is the default set
assumed by all effects unless changed. It can be used to quickly create an effect which would include all the
luminaires in your system.
Set
Part 1 Part 2 Part 3 Part 4
Set 0
Part 1
All Patched Channels