PRG V676 User Manual 3.5 - Manual (Page 63)

V676 ® / V476 ® CONTROL CONSOLE USER MANUAL 45
Clear Errors / Reset Node
Nodes can be reset from the System Configuration screen.
To clear or reset node:
Step 1. Press

nodes

.
Step 2. Press button of required Node.
Step 3. Press

Clear Errors

and/or

Reset

as required.
Update Configuration
In the event a new device(s) is added to your system while the console is powered up, the system can be repolled so
that the new device(s) will appear in the System Configuration window.
Note: This is not related to the Stored Configuration.
To update a configuration:
+ At Special menu, select Update Configuration.