PRG V676 User Manual 3.5 - Manual (Page 242)

224 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Highlight
Highlight provides a method for identifying a particular fixture or set of fixtures by putting
them into a predefined state which distinguishes them from the rest of the system. When
the [Highlight] button is pressed (or Highlight is selected from the Special menu), all
selected channels will go into the defined highlight state. The [Highlight] button will flash
to indicate that highlight is active. Pressing [Highlight] again will exit the highlight state.
If there are multiple channels selected and the [Next] or [Last] button is pressed, all highlighted channels but one will
go to the defined "lowlight" state, and the single (selected) channel will be highlighted. As long as highlight is active,
selected channels will go to the highlight state.
Pressing [Next] + [Last] will highlight all fixtures in the selection.
The highlight and lowlight states are defined in the new Highlight tab of the Settings window. The states can include
an intensity level, a Color palette item, a Beam palette item, and/or a Preset.
Guidelines :
+ The settings are applied in sequence and can overwrite each other.
+ Items that are not checked will be ignored.
+ The default states are full intensity for highlight and no action for lowlight.
+ The user-defined highlight and lowlight states are also used for QuickFocus.
Last Next
High
Light
Flip