PRG V676 User Manual 3.5 - Manual (Page 336)

318 V676 ® / V476 ® CONTROL CONSOLE USER MANUAL
Channel Filter
The Channel Filter feature is used to specify certain channels for playback on a submaster. Those "filtered" channels
then become the only channels used by the submaster whenever it plays back a cue or effect.
Filter a channel using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Select

Channel Filter

checkbox.
Step 3. Press

Close

to close Setup screen.
To release a channel filter using submaster touchscreen:
Step 1. Choose a submaster to bring up its Setup options. ("Choose" is activated by touching the specific
submaster on the touchscreen.)
Step 2. Deselect

Channel Filter

checkbox or press

Clear

to clear all submaster settings.
Step 3. Press

Close

to close Setup screen.
Make submaster’s channel filter the current selection:
+ Press [Chan] + submaster choose to make the submaster's channel filter the current selection.
Modes