Establishing communication – Basler Electric BE1-11t User Manual
Page 240
228
9424200995 Rev H
Figure 183. Activation Key Email
Figure 184. Activate Device Plugin
Establishing Communication
Communication between BESTCOMSPlus and the BE1-11t is established by clicking on the Connect
button on the BE1-11 Connection screen (see Figure 180) or by clicking on the Connect button on the
lower menu bar of the main BESTCOMSPlus screen (Figure 176). If you receive an “Unable to Connect
to Device” error message, verify that communications are configured properly. Only one Ethernet
connection is allowed at one time. Download all settings and logic from the BE1-11t by selecting
Download Settings and Logic from the Communication pull-down menu. BESTCOMSPlus will read all
settings and logic from the BE1-11t and load them into BESTCOMSPlus memory. See Figure 185.
Figure 185. Processing, Please Wait…
BESTCOMSPlus
® Software
BE1-11t