Yokogawa FieldMate - Manual (Page 100)

<E Specifications Common to FieldMate Basic and Advance>
E-50
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Menu Items in the Right-click Menu when a Parameter is Selected
Table E-3-12
Menu Item Description
Parameter Description… Displays the Parameter Description dialog box.
Send to Custom Tab →
(a list of defined custom tabs)
This item is enabled for any tab other than the Custom tab. It adds the
selected parameter to the display objects of the selected custom tabs.
Delete from Custom Tab This item is only enabled for the Custom tab. It removes the selected
parameter from the display objects of the Custom tab.
 Tool Bar
Table E-3-13
Icon Function Function Key
Update Device Values and Attributes - All TAB F1
Update Device Values – All TAB F5
Download Checked Parameters - All TAB F6
Find Parameters No key assigned
Undo Modifications No key assigned
Save Custom TAB Info No key assigned
Show Read Only Parameters No key assigned
Change O/S Mode during download (Note) No key assigned
DD Menu (Note) F7
(Note): This is only enabled for a FOUNDATION fieldbus H1 device.
 Window Specification Details
- Any parameter value that will not fit in the display area is displayed in a text tool tip.
- The engineering unit is displayed on both the Device Values area and Work area. (Only for
parameters with an engineering unit.)
- The display/edit format is applied, which means that when values are displayed, they are
displayed in accordance with the display format defined in the DD. Also, when values are
edited, they are displayed in accordance with the edit format defined in the DD.
- The scaling factor is applied, which means that parameters for which a scaling factor is
defined by the DD are displayed by the scaling factor being multiplied to a value read from
the connected device.
- In the search screen, searches for parameter names including input characters are
performed in order. Searching for values is not supported.