Yokogawa FieldMate - Manual (Page 33)

<B Packaging and Installation>
B-19
IM 01R01A01-01E 9th Edition : May 31, 2013-00
B-3-2 Notes on FFusb
Softing FFusb driver software that is dedicated to Yokogawa FieldMate is included in
FFusb CD-ROM.
For details on installing the FFusb driver, see the corresponding manual of Softing. The
following are notes on FFusb.
 Installing the FFusb Driver
Make sure that FieldMate has been installed before installing the FFusb driver for FieldMate.
 Settings after Installation
1. After starting FieldMate, click Tools and then select FOUNDATION fieldbus Interface
Configuration.
2. Configure the setting as follows.
Device Address: Visitor