Yokogawa FieldMate - Manual (Page 347)

<Appendix C Device Replacement Tool>
App.-26
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Step 1-2 Setting COM port and polling address (Upload – Connect)
Select a COM port of the FieldMate modem and the polling address of the original device
Connect the device to the modem. Select the desired COM port and device address, and then
click the “Next” button.
When the USB FieldMate modem is connected, this tool automatically selects the COM port to
which the modem is connected. Polling address is not recognized automatically. Please confirm
the polling address in advance.
App.C5E.ai
Figure App.-C-5 COM Port and Polling Address Setting Display
 Step 1-3 Upload (Upload – Read)
Upload the parameters of the original device
The vendor’s name and model name of the original device appear.
Check the identity of the connected device and then click the “Upload” button.
App.C6E.ai
Figure App.-C-6 Upload Display