Yokogawa FieldMate - Manual (Page 276)

<I ISA100 device configuration>
I-22
IM 01R01A01-01E 9th Edition : May 31, 2013-00
I-3-2 HART Device Recognition
The followings shows the items displayed in Segment Viewer
Table I-3-1 Display Items in Segment Viewer
Item Contents Default
Update Target Checked items are targets for update or automatic update
-
Update Status Icon “Updating”, “Updated”, or “Failed to update”
Registered Flag
Displays the “!” icon if the device has not yet been registered in
Dvice Maintenance Information
Device Flag Displayed if you set a device flag using the Device Navigator
Memo Flag
Displayed if there is a memo in Device Maintenance
Information.
Information
Address Address of HART device
Cond.
Device Tag Device icon and device tag (including Tag Extension Mode)
Device ID Device Specific ID
Manufacture ID Manufacturer and its ID
Device Type Model and model ID
Device Revision Device Revision
Route Device Tag name of route device via HART adaptor
Detail information which Default is Cond. requires to access ISA100 devices individually. Turn on
the check box of Update Target.
The display immediately after the basic information of devices has been acquired is shown
below.
I030201E.ai
2
1
HART adaptor
Figure I-3-2 Basic Information