Yokogawa FieldMate - Manual (Page 189)

<F Advance>
F-70
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Managing FDT Project
 Creating New FDT Project
You can create a new FDT Project using New FDT Project.
 Deleting FDT Project
You can select and delete the FDT Project using Delete FDT Project. The confirmation dialog “Do
you want to delete FDT project?” appears.
 Copying FDT Project
You can select and copy the FDT Project using Duplicate FDT Project. You must specify a new
name for the FDT project.
 Exporting and Importing FDT Project
You can select and export the FDT Project to an external file using Export FDT Project.
The default folder and file name/location for Import/Export FDT Project is “$(FieldMate install
folder)\Export.”
The default file name after using Export FDT Project is “(FDT Project name).fmpjt.”
Also, you can also import that file using Import FDT Project. If another file with the same name
exists in FieldMate, the import is aborted and an error message appears.
TIP
The FDT Project cannot be created, deleted, copied, exported, and imported while DTM Works is running.
You can open the FDT Project and rename it by right-clicking the name of the FDT Project .
DTM Works enables you to open only one FDT Project at a time.
 Update and Scan Devices
In UDC mode, you can update and scan for live devices that are connected to FieldMate. When
you update and scan for live devices, the status and progress of the operation are displayed in
the status bar of FieldMate.