Yokogawa FieldMate - Manual (Page 144)

<F Advance>
F-25
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Login Window
At FieldMate startup, the following login window appears. Enter the username and password and
specify whether or not to automatically scan HART device/FOUNDATION fieldbus H1 device/
PROFIBUS device/BRAIN device/ISA100 device immediately after startup.
When users are not defined, it is taken as log in by the default user and the username and
password need not be entered.
F020103E.ai
Grayed out when users are not defined.
Select from the following.
HART, Foundation Fieldbus, PROFIBUS, BRAIN,
ISA100 (Infrared), ISA100 (Gateway) (none)
As for User ID and Scan Segment, the setting
value of the previous login is retained and it is set
to default. However User ID and Password are
grayed out and Default Scan Segment selects
HART immediately after installation.
Figure F-2-3 Login Window