Yokogawa FieldMate - Manual (Page 296)

<I ISA100 device configuration>
I-42
IM 01R01A01-01E 9th Edition : May 31, 2013-00
I-7 ISA100 Device Maintenance
Information (Advance Only)
ISA100 device is registered in the device maintenance information. Device maintenance
information consists of maintenance information of each device.
Please refer to Device maintenance Information described in PART F for detail.
Device maintenance Information of ISA100 is shown as follows.
App
: Editable by user
* 1 : Editable only once. After that, not editable.
* 2 : Update “Power Supply Status”, “Status” when device registration or manual
registration of device maintenance information
* 3 : Update when any of items are saved.
Online registration: The device is registered from Segment Viewer.
Offline registration: the device is created in Device Navigator
Table I-7-1
Item Parameter Description Editable
Registration
On line Off line
Basic
Information
Device Tag Device tag App App App
Device ID (EUI-64) 64 bit address to identify the device App*1 App
Device Tag
Comment
Device tag comments App
Communication
Type
Read only. Displays any of
HART, FOUNDATION fieldbus,
PROFIBUS, BRAIN, ISA100 or
Other.
App App
Vendor Read only. Character string that
indicates the device vendor (e.g.
YOKOGAWA)
App App
Manufacture ID Read only. ID that indicates the
device vendor (e.g. 0x00594543)
App App
Category Character string that indicates the
type of the device (e.g. Flow Meter)
App
Model Read only. Character string that
indicates the device model (e.g.
EJA100A)
App App
Device Type Read only. ID that indicates the
device model (e.g. 0x0003)
App App
Netwok ID ID to identify network App App
Address IP address when Devices Join App App
Device Role Device Role App App
Revision Character string that indicates the
device revision (e.g. R2.01)
App App
Device Revision Read only. ID that indicates the
device revision (e.g. 2)
App App
Communication
Path
Read only. Displays a list of
communication paths.
App App