Yokogawa FieldMate - Manual (Page 230)

<G FieldMate Setup>
G-5
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Default Settings Immediately after Installation
The following table shows the default settings.
Any changes to these settings are stored. (Settings are not stored for each user.)
Table G-2-1 Options
Item Default
Segment
Viewer
Auto Update Off
Enable status
display Icon
On
HART - Device Viewer
- Device Setup
- Assigned DTM
- Select DTM
- Parameter Manager
- Open Device Maintenance Info (only for Advance version)
- Register Device Maintenance Info (only for Advance version)
- Tag/Address Assignment
Device
Setup
FOUNDATION
fieldbus
- Device Viewer
- Device Setup
- Assigned DTM
- Select DTM
- DD Menu
- Parameter Manager
- Open Device Maintenance Info (only for Advance version)
- Register Device Maintenance Info (only for Advance version)
- Tag/Address Assignment
- Device Class Setting
Device
Setup
PROFIBUS - Device Setup
- Assigned DTM
- Select DTM
- Open Device Maintenance Info (only for Advance version)
- Register Device Maintenance Info (only for Advance version)
Device
Setup
BRAIN - Device Setup
- Assigned DTM
- Select DTM
- Open Device Maintenance Info (only for Advance version)
- Register Device Maintenance Info (only for Advance version)
Device
Setup
ISA100 - Device Setup
- Assigned DTM
- Selected DTM
- Open Device Maintenance Info (only for Advance version)
- Register Device Maintenance Info (only for Advance version)
Device
Setup
Device
Maintenance
Info (Only
for Advance
version)
Aux 1, Aux 2, and Aux 3 Blank
Communication route when the DTM starts from
Device Maintenance Information.
ISA100 Infrared
HART (via
ISA100
HART
Adaptor)
Gateway
FDT project Newly created FDT project support legacy DTMs. Off