Yokogawa FieldMate - Manual (Page 300)

<I ISA100 device configuration>
I-46
IM 01R01A01-01E 9th Edition : May 31, 2013-00
• Registration condition
Always create new device maintenance information:
Check this box if you want to create new device maintenance information for all
devices to be registered.
Setting of new registration:
Under this condition, if there is any existing device maintenance information,
create new information or overwrite it.
• Progress
Indicates the progress of registration.
• Buttons
OK:
Registers the target device
Cancel:
Cancels the registration of the target device and goes to the next target device.
All Cancel:
Cancels the registration of the present and following target devices and closes
the dialog.
Table I-7-2 Objective devices of Device Maintenance Information menu
OK / Cancel button
[Register a new device. (Register a new device to
Device Maintenance Info.)]
Set one device at a time.
[Overwrite the device. (Register the connected
device to the existing device.)]
[Register a new device
to subsequent tasks.]
- All selected devices.
[If the existing device
exists, select new device
registration or overwrite.]
Set one device at a time.