Yokogawa FieldMate - Manual (Page 219)

<F Advance>
F-100
IM 01R01A01-01E 9th Edition : May 31, 2013-00
F-8 Relation between Main Window and
DTM Works
This chapter describes the details of the relation between DTM Works and the main
windows - Segment Viewer, Device Navigator, and History.
F-8-1 Startup
The following shows the main ways to start up DTM Works.
• Select the connected device in the BIC mode of Segment Viewer and start up DTM
Works.
• Select the database device in Device Navigator and start up DTM Works.
• Select the DTM data in Device Navigation Info and start up DTM Works.
• Use New FDT Project in the UDC mode of Segment Viewer to start up DTM Works.
• Use Open FDT Project in the UDC mode of Segment Viewer to start up DTM Works.
• Select a connected device in UDC mode of Segment Viewer and start up DTM Works.