E-29, Download to device icon, Load from file icon – Yokogawa FieldMate User Manual

Page 79: Save to file icon, Load from database icon, Save to database icon, Refresh relation button (type b only), Import/export button

Advertising

<E Specifications Common to FieldMate Basic and Advance>

E-29

IM 01R01A01-01E

9th Edition : May 31, 2013-00

Download to Device Icon:

It is applicable for Type A DTM designed by Yokogawa.
Downloads the device parameters in the Device DTM that have been edited in the Offline

Parameter window to device internal parameters. (Note)

(Note) In an environment in which operation is performed regardless of connection to a device, a device can be added before it is

delivered, for example, to edit the device parameters on the Offline Parameter window in advance. These parameters can

then be written to the device using “Download to Device” after the device has been delivered and installed. *1

1 Refer to Part F

In order to reflect the parameters to Offline Window after editing the ones in Online Window,

either “Upload from Device Icon” or “Upload from Device Button” is required.

Load from File Icon:

It retrieves DTM data where Offline parameters are included from file.

Save to File Icon:

It stores DTM data where Offline parameters are included to file.

Area where Offline parameters are included

It indicates Offline parameters embedded in DTM even when Offline window is not displayed.

Load from Database Icon:

It retrieves DTM data where Offline parameters are included from database.

Save to Database Icon:

It stores DTM data where Offline parameters are included to database.

TIP

Save to file Icon, Load from file Icon, Save to database Icon and Load from database Icon will be applied to all the

setting parameters excluding dynamic parameters.

Refresh relation Button (Type B Only):

Interrelation among URV, LRV and Unit will be refreshed for example when unit is changed. This

button redisplays the parameters on the screen only. It never writes parameters to the device.