Yokogawa FieldMate - Manual (Page 23)

<B Packaging and Installation>
B-9
IM 01R01A01-01E 9th Edition : May 31, 2013-00
12. After restart PC, the following window is displayed.
B010313E.ai
Figure B-1-13
NOTE
If installation does not start automatically after inserting the FieldMate Media, double-click the
following file to execute it.
FieldMate Media\FM\Setup.exe
 Objects to be Installed
Contents to be installed automatically
Out of the contents that are packaged in FieldMate R2.06/Device Files R3.05 Media, FieldMate
software, USB FieldMate modem driver and Yokogawa device files.
NOTE
The USB FieldMate modem driver is installed automatically.
Check that “Silicon Laboratories CP210x USB to UART Bridge (Driver Removal)” is installed
using Programs and Features in the Control Panel.
If the installation is not performed correctly, double-click the following file.
FieldMate Media\USB_Modem_Driver\FMModemInstaller.exe
Contents to be selectively installed
Yokogawa device DTM: All DTMs or DTM for each communication protocol can be selected. The
object is all Yokogawa device related files for individual communication protocols stored in the
Device Files Media.
Device files (DD/DTM) of other manufacturers: The object is HART and FOUNDATION fieldbus
DD/DTMs. DD and DTM can be selected for each vendor, model, or revision.
SEE
ALSO For the installation procedure of device file media, refer to Part J, “Adding/Removing DD/DTM.”