Yokogawa FieldMate - Manual (Page 151)

<F Advance>
F-32
IM 01R01A01-01E 9th Edition : May 31, 2013-00
F-3 Parameter Manager
In Advance, functions listed below are additionally supported.
1. The uploaded parameter can be saved and loaded in the database (device
maintenance information), which is assigned to the device. (up to 5 sets per device)
2. The parameter obtained from the connected device and the parameter, loaded from
the database, can be compared. The difference between them can be checked.
3. The parameters saved to the database can be displayed on the left and right of the
screen for comparison.
4. Even unregistered device can load parameters in the database of the same Device
Type.
Parameter Manager has two ways for use; communicating with the connected device, and not
communicating with the connected device.
• In Segment Viewer
Selecting the connected device and starting Parameter Manager: Device Mode
• In Device Navigator/History
Selecting the device in the database and starting Parameter Manager: Database Mode
The schematic diagram is shown below.
F030101E.ai
Parameter Manager Screen
Copy of the
connected
device
Work
Area
Interpretation
Database
(device
maintenance
information)
External file
External file
Export Import
Upload Download
Figure F-3-1 Parameter Manager Overview (Device Mode)