Yokogawa FieldMate - Manual (Page 330)

<Appendix B Usage Examples of Offline Function in Type B/C DTM>
App.-9
IM 01R01A01-01E 9th Edition : May 31, 2013-00
3. Change the parameters to the desired values. The changed parameters are displayed in
magenta. (An Edit mark is added in case of Type C.)
Leave other parameters “-/-”.
Only the parameters in magenta will be downloaded at one time to the connected devices.
4. Some devices use their own units or setting modes.
In Type B DTM only, click the “Refresh relation” button to reflect units or settings modes.
App.B05E.ai
Figure App.-B-5 Example display of Type B
5. Click the “Save to Database” button to save the information during the procedure. (In case
of Type C, select “Apply” button before pressing “Save to Database”.)
You can restart the procedure from Step 2.
6. Click the “Save to Database” button after the setting is completed.
App.B06E.ai
Figure App.-B-6
7. Exit DTM.