I-5-4 infrared adapter (actisys ir224un), I-5-4-1 driver installation, I-5-4-2 device checks – Yokogawa FieldMate User Manual
Page 286: I-5-4, I-5-4-2, I-32
Advertising
<I ISA100 device configuration>
I-32
IM 01R01A01-01E
9th Edition : May 31, 2013-00
I-5-4 Infrared Adapter (ACTiSYS IR224UN)
I-5-4-1 Driver Installation
Install the infrared adapter driver, referring to the instruction manual provided by ACTiSYS.
I-5-4-2 Device Checks
Connect the infrared adapter to a USB port on the PC. If the infrared adapter is recognized by the
PC’s Device Manager, the adapter has been installed.
To display Device Manager, click Control Panel of Windows, then Management Tools, Computer
Management, and Device Manager.
Note down the number of the COM port assigned to the infrared adapter. In the example shown
below, COM 5 is assigned.
I050401E.ai
Figure I-5-3
Advertising