Yokogawa FieldMate - Manual (Page 372)

<Appendix H FieldMate Provisioning Device Tool>
App.-51
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Setting Provisioning Information
Information on device tag and Network ID can be set by user to field wireless devices.
Placing the infrared receiving port on the field wireless device and the infrared port of the adapter
close together and clicking the [Start Provisioning] button sets the provisioning information in the
field wireless device.
During the communication, a progress bar will be displayed as shown below.
App.H08E.ai
Figure App.-H-8
When the message dialog is displayed as shown below, the provisioning information has been
set correctly.
App.H09E.ai
Figure App.-H-9
TIP
Repeat this procedure for all the field wireless devices to be provisioned.