Yokogawa FieldMate - Manual (Page 293)

<I ISA100 device configuration>
I-39
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Device Setup
Start DTM Works and perform the device setup.
[Device Setup] can be accessed in any of the following ways.
 Right-click the desired ISA100 device in Segment Viewer or Device Navigator and select
[Device Setup].
 Click the [Device Setup] icon on the tool bar while the desired ISA100 device is selected in
Segment Viewer or Device Navigator.
 Open the [Action] menu and select [Device Setup] while the desired ISA100 device is
selected in Segment Viewer or Device Navigator.
 Click the [Device Setup] icon for the desired ISA100 device in Segment Viewer.
 Double-click the device icon for the desired ISA100 device in Segment Viewer (only when
[Device Setup] is assigned in the [Option] settings).
 Assigned DTM
In DTM Works, start the DTM that is assigned in the DTM catalog.
[Assigned DTM] can be accessed in any of the following ways.
 Right-click the desired ISA100 device in Segment Viewer or Device Navigator and select
[Assigned DTM].
 Open the [Action] menu and select [Assigned DTM] while the desired ISA100 device is
selected in Segment Viewer or Device Navigator.
 Double-click the device icon for the desired ISA100 device in Segment Viewer (only when
[Assigned DTM] is assigned in the [Option] settings).