Yokogawa FieldMate - Manual (Page 288)

<I ISA100 device configuration>
I-34
IM 01R01A01-01E 9th Edition : May 31, 2013-00
I-5-6 ISA100 Device Recognition
ISA100 device and related information are displayed on Segment Viewer. A single device
to be displayed is the communicated device only via infrared.
I050601E.ai
3. Update
1. Select
Figure I-5-5
ISA100 device is recognized in the following procedure.
1. On Segment Viewer at tree menu, select “ISA100 (Infrared)”.
2. Hold the infrared adapter close to the devise.
3. Press “Update”.
During communication, do not remove the infrared adapter from the communicating device.
Remarks
1. Segment Viewer
In case of ISA100 device in Deep Sleep mode, communication error may be encountered
when the device is accessed for the first time. Please update in Segment Viewer again and
initiate communication.
2. Infrared communication
Hold the Infrared adaptor to the accessed ISA100 device only. It is advisable to keep
another wireless devices not to be close to the currently accessed device if any.
3. Device Status Display
Function blocks may be O/S mode for ISA100 device of Yokogawa as default. Even though
device is healthy, gray color icon may be displayed in Segment Viewer. Please refer to the
individual device IM for details