Yokogawa FieldMate - Manual (Page 322)

<Appendix A List of Sources and Messages>
App.-1
IM 01R01A01-01E 9th Edition : May 31, 2013-00
Appendix A List of Sources and Messages
The following shows a list of sources/messages in History. The underlined part is variable
data and the table below shows an example.
 When the Type is Configuration
Table App.-A-1
Source Message Basic Advance
Set Tag/Address Set Device Tag Old=FT1001 New=FT1002
App.
Set Tag/Address Set Device Address Old=246 New=247
Set Device Class Set Device Class New=LinkMaster
Set Device Class Restart Device
DTM Works Records logs output by DTM.
DTM Works Change Variable Name=02 : TAG No. Old=FT1001 New=PT1001
DTM Works AutoSetup finished successfully
DTM Works Device Status Event ok
DD Menu Records logs output by DD Menu (such as method execution).
Parameter Manager Download Device Parameter
Parameter=_TB01.ALERT_KEY (Alert Key)
Old=3 New=5
FMDeviceRep Tool Conversion is completed from Yokogawa EJA HART5
Parameter=Unit, New=kPa
AXF Verification Tool Changing Variable Name = Adhesion/Adhesion Check Old=No
New=Yes
N/A App.
AXF Verification Tool Changing Variable Name = module write protect/Enable Wrt 10 min
AXF Verification Tool Changing Variable Name = Pulse Set/Pulse Scale Old=100
New=10
AXF Verification Tool Changing Variable Name = Pulse Set/Pulse Unit Old=Pulse/s
New=Unit/P
AXF Verification Tool Changing Variable Name = Vendor Parameter2 Old = 30 New = 120
AXF Verification Tool Execute Verification Tool
AXF Verification Tool Terminate Verification Tool