F-71, Scanning projects with comm dtms or gateway dtms – Yokogawa FieldMate User Manual
Page 190
Advertising
<F Advance>
F-71
IM 01R01A01-01E
9th Edition : May 31, 2013-00
Scanning Projects with Comm DTMs or Gateway DTMs
Follow these steps to scan a project that is created with only communication DTMs or gateway
DTMs:
1. From Segment Viewer in UDC mode, expand the FDT project, and select the
communication or gateway DTM.
Select the
communication DTM.
F050203E.ai
Figure F-5-11
2. Click the [Update] button.
The devices that are connected to FieldMate and are under the selected DTM appear on
the right pane.
Click the Update button.
F050204E.ai
Device DTMs that are
connected to FieldMate and
are supported by the selected
communication DTM
Figure F-5-12
Advertising