Yokogawa FieldMate - Manual (Page 237)

<H HART Device Tag Display Mode>
H-3
IM 01R01A01-01E 9th Edition : May 31, 2013-00
H-3 Setting or Changing Device Tag
Mode
The HART device tag mode can be set or changed as follows.
 Calling
Start → All programs → YOKOGAWA FieldMate → Tools → FieldMate Setup→ Device Tag
Mode tab → FieldMate Setup Tool
TIP
In the Windows Vista operating system, a window is displayed for confirmation due to the user account control.
H030101E.ai
Figure H-3-1 User Account Control
Click “Continue.”
When the user management of FieldMate is defined (only for Advance), the following login dialog
is displayed. After login, the FieldMate Setup Tool window appears.
FieldMate Setup Tool does not start if FieldMate is already running.
H030102E.ai
Figure H-3-2 Login Window