Yokogawa FieldMate - Manual (Page 319)

<J Adding/Deleting Device Files>
J-14
IM 01R01A01-01E 9th Edition : May 31, 2013-00
J-3 DTM Setup
It is used to assign the DTM of other manufacturers’ HART/FOUNDATION fieldbus/
PROFIBUS/ISA100 devices with a device of a specific model after installing the DTM.
Assignment is allowed that single DTM supports more than single device model in DTM
Setup.
 Startup
Start DTM Setup by clicking the Start button, pointing to All Programs → YOKOGAWA FieldMate
→ Tools → DTM Setup.
 Window
The DTM Setup Tool has two windows, the Main window and the Edit window.
 Main window
J030101E.ai
This area displays a list of all HART/FOUNDATION
fieldbus/PROFIBUS/ISA100 device DTMs that are
installed in the PC. Any device DTM with a
communication protocol that is other than HART/
FOUNDATION fieldbus/PROFIBUS/ISA100 is not
displayed.
DTM setup is displayed
for each communication
protocol.
When no device model is assigned to Device DTM
(device model is not defined), the Vendor, Model,
and Revisions fields are empty.
If you want to assign several device models to a
single DTM, or delete any device model definition,
click Edit.
This area shows the device models that are
assigned to device DTMs.
Figure J-3-1 DTM Setup Tool (1/2)