Yokogawa FieldMate - Manual (Page 380)

<Appendix J Assignment Change of FDT 1.2 and FDT 2.0 DTM>
App.-59
IM 01R01A01-01E 9th Edition : May 31, 2013-00
3. Assign new device revision information to the FDT 2.0 DTM by performing these steps:
a. Double-click the FDT 2.0 DTM.
Alternatively, select the FDT 2.0 DTM and click the [Edit] button.
The Edit window of the DTM Setup Tool appears.
b. In the Device Types section, from the Vendor drop-down list, select a vendor.
c. From the Model drop-down list, select a device model.
d. In the Revisions box, type the device revision. For multiple device revisions, separate the
device revisions with a comma.
e. Click the [Add] button.
The Edit window of the DTM Setup Tool closes.
4. In the DTM Setup Tool window, click [Apply].
5. Click [OK].
The device revision information is assigned to the FDT 2.0 DTM.
Click the Edit button to modify
the device association.
A device revision must be
assigned to a device uniquely.
You need to delete the previous
association of the device before
assigning another device DTM
to the device.
App.J01E.ai
Figure App.-J-1 DTM Setup Tool