Yokogawa FieldMate - Manual (Page 66)

<E Specifications Common to FieldMate Basic and Advance>
E-16
IM 01R01A01-01E 9th Edition : May 31, 2013-00
Menu Description
PROFIBUS Interface
Configuration,,,
This window is displayed only when PROFIBUS is selected.
Starts the PROFIBUS Interface Configuration window.
Refer to User Manual of Softing.
BRAIN Modem
Configuration…
This window is displayed only when BRAIN is selected.
Calls up the BRAIN Modem Configuration window.
Refer to Part G.
ISA100(Infrared)
Interface Configuration
This enables you to configure USB port.
ISA100(Gateway)
Interface Configuration
Configure Host name or IP address for the Gateway.
* 1: It is not applicable for ISA100 (Gateway).
 Operation upon Double-clicking
The user can select menus as the operation to be performed after selecting and double-clicking
on a device in the Segment Viewer window.
(Select Tools → Options to make setting. Refer to Part G. When you execute the “Device Setup,”
DTM Works or Built-in DTM or Parameter Manager starts.
The following shows the start up algorithm.
1. Start Assigned DTM when device is linked with DTM in DTM Setup.
2. Selection dialog appears when device is not linked with DTM, showing Parameter Manager,
Select DTM or Built-in DTM.
 Display if a Device Tag is not defined or there are Duplicated Device Tags
• If a HART device tag is not defined
→ Only blank space is displayed in Segment Viewer and History.
• If there are duplicated HART device tags
→ Duplicated device tags are displayed in Segment Viewer and History.
• If a FOUNDATION fieldbus H1 device tag is not defined
→ “(Device Tag Undefined)” is displayed in Segment Viewer.
In this case, menu items other than Tag/Address Assignments are disabled.
• If there are duplicated FOUNDATION fieldbus H1 device tags
→ “(Device Tag Duplicated)” is displayed in Segment Viewer.
In this case, menu items other than Tag/Address Assignments are disabled.