Yokogawa FieldMate - Manual (Page 77)

<E Specifications Common to FieldMate Basic and Advance>
E-27
IM 01R01A01-01E 9th Edition : May 31, 2013-00
 Built-in DTM
Built-in DTM are available for FOUNDATION fieldbus, HART, and ISA100.
FOUNDATION fieldbus Built-in DTM
This is launched when neither DTM of the connected device nor DD are installed in FieldMate
specific location. (Refer to Part J)
HART Built-in DTM
This is launched when neither DTM of the connected device nor DD are installed in FieldMate
specific location. (Refer to Part J)
When DD of the connected device is not installed, it is launched with Generic status with
commonly used DD.
I.e. Device Tag, Descriptor, Message, Polling Address, Burst mode, PV sensor unit, URV, LRV
etc. parameters and menu described in Generic DD can be accessed.
ISA100 Built-in DTM
This is launched when neither DTM of the connected device nor DD are installed in FieldMate
specific location. (Refer to Part J)