Yokogawa FieldMate - Manual (Page 351)

<Appendix C Device Replacement Tool>
App.-30
IM 01R01A01-01E 9th Edition : May 31, 2013-00
The retrieved parameters are displayed.
Click the “Open” button to proceed to the next step.
App.C13E.ai
Figure App.-C-13 File Reading Confirmation Display
 Step 2-3 Set a COM port and polling address (Download – Connect)
Seleting a COM port and the polling address of the replacing device
Connect the device to the modem. Select the desired COM port and device address, and then
click the “Next” button.
When the USB FieldMate modem is connected, the tool automatically selects the COM port to
which the modem is connected.
App.C14E.ai
Figure App.-C-14 COM Port and Polling Address Setting Display