E-3-2 dtm works, E-19 – Yokogawa FieldMate User Manual
Page 69
<E Specifications Common to FieldMate Basic and Advance>
E-19
IM 01R01A01-01E
9th Edition : May 31, 2013-00
E-3-2 DTM Works
DTM Works is a frame application in which device DTM is able to run.
DTM (Device Type Manager) is a GUI application specifically designed for devices that
enables device’s specific parameters to be set. Because it complies with the FDT/DTM
standards, it also enables the parameters to be adjusted or set in the same window in
others’ host systems that support DTM.
TIP
The following describes the Yokogawa device DTM. When you use the device DTM of other manufacturer,
operation and display are subject to change depending on the device manufacturers. Refer to the instruction
manual for the device DTM of the respective manufacturers.