Lenze 931E/K Small Drives Control - Manual (Page 106)

Digital outputs and analog inputs and outputs
Digital outputs DOUT1, DOUT2
7
l
106 SW−HB 13.0002−EN 4.1
7 Digital outputs and analog inputs and outputs
7.1 Digital outputs DOUT1, DOUT2
By default, four digital outputs (DOUT0 ... DOUT3) are available to display selected
operating states of the 931E/K servo positioning controller. The output DOUT0 is firmly
connected and indicates if the servo positioning controller is ready for operation. The
digital output DOUT3 is firmly assigned to the holding brake. The digital outputs (DOUT1
and DOUT2) can be assigned to different functionalities.
For an overview of the available digital outputs and the current function assignments,
please open the menu Display
W Digital outputs.
931e_316