Commissioning – Lenze 931E/K Small Drives Control User Manual
Page 42
Commissioning
Torque control
Selecting a motor from the motor database (only 931E)
l
42
SW−HB 13.0002−EN 4.1
5.3.3
Selecting a motor from the motor database (only 931E)
The Small Drives Control parameterisation program contains a motor database with the
most important data for different motor types.
)
Note!
The motor database contains the data of the Lenze synchronous servo motors
(extra−low voltage version). Apart from the motor data (pole pair number,
stator inductance,
…), default settings for the feedback system and current
and speed controller have been implemented. Using the default settings will
make commissioning fast and easy.
The function can be accessed via the menu Parameters
W Device parameters W Motor data
W Select new motor. A list will be displayed, from which you can select the motor used:
931e_372
If a Lenze motor is used, select the motor and confirm your selection with Accept values and
close dialog.
Otherwise, click Quit without changes.