Lenze 931E/K Small Drives Control - Manual (Page 185)

Appendix
Parameter set management
Printing parameter sets
10
l
185 SW−HB 13.0002−EN 4.1
Additional information
In this menu, the user can enter additional information on the parameter set. The
information will be accepted in the plain text. This mainly concerns the date, which may
be defined independently of the current date.
931e_342
The Order, Comment 1/2, Motor data fields will be directly taken over in the plain text:
Field Contents
Order ID of the order/project for which the parameter set has been created
Comment 1, comment 2 Special characteristics of the parameter set
Motor data ID of the motor data record (from file motor.ini)
Due to the format, the entries should not be longer than half a line (approx. 40 characters).
By default, the current date will be used as date for the plain text. Click Change to edit the
date field and change the date. The changed date will be taken over in the plain text.
Page preview
After selecting the Page preview button from the Print menu, the plain text will be created
and the page preview displayed. The page preview gives you a preview of the printout to
be expected.
Save as text file
Click the Save as text file button to save and process the printout as a *.txt−file on hard disk
(e.g. file transfer by e−mail).
)
Note!
ƒ The text files will be saved in the TXT sub−directory of the parameterisation
program.
ƒ The parameter sets can be printed both in online and offline mode.