Lenze 931E/K Small Drives Control - Manual (Page 17)

User interface
Starting SDC / user interface
Standard control windows
4
l
17 SW−HB 13.0002−EN 4.1
4.2.5 Standard control windows
With online parameterisation, the command window, the status window and the actual
value window will always be open by default. With offline parameterisation, the status
window and the actual value window will not be open.
The actual value window displays current controller parameters such as current, speed,
etc. Select the menu items Display
W Actual values to configure the actual value window.
Mark all values to be displayed with a tick. Select the options Enable all and Disable all to
minimise or maximise the actual value window.
931e_366
4.2.6 Directories
The installed version of the parameterisation program contains the following
sub−directories:
Directory Contents
FIRMWARE Firmware versions
TXT Default directory for the plain text output of parameter data
DCO Default directory for the parameter files
EDS CAN configuration
GSD Profibus configuration
XML EtherCAT configuration