Lenze 931E/K Small Drives Control User Manual
Page 77
Advertising
![background image](/manuals/566112/77/background.png)
Commissioning
Course program
Target parameterisation
l
77
SW−HB 13.0002−EN 4.1
Time−optimal positioning
Positioning with jerk limitation
Fig. 6
Time optimal positioning and positioning with jerk limitation
The positioning range selected under Parameters
W Positioning W Settings position sets /
course program is shown in the Positioning range (input limits) field.
)
Note!
The settings of the setpoint ramp do not have any influence on the traversing
profiles during homing and positioning.
Advertising