Lenze 931E/K Small Drives Control - Manual (Page 26)

Commissioning
Speed control
Activating the operating mode
5
l
26 SW−HB 13.0002−EN 4.1
5.2.4 Activating the operating mode
For speed control, configure the command window as follows:
931e_208
5.2.5 Input configuration
Select the menu Parameters
W I/Os W Digital inputs and check if the analog input has been
configured correctly.
)
Note!
The analog inputs must not be configured as digital inputs. The selection
"AIN’s used as DIN’s" must not be set, otherwise, the analog setpoint cannot
be evaluated.
931e_214