Lenze 931E/K Small Drives Control - Manual (Page 132)

Troubleshooting and fault elimination
Error management
9
l
132 SW−HB 13.0002−EN 4.1
9.4 Error management
The error management window and the error window are used for error messages and
warnings.
Select Error
W Error management to open the error management window:
931e_276
This window is used to determine the error response of the servo positioning controller.
One out of four response options will be assigned to each of the 64 possible errors.
1. The power stage will be switched off (the motor will coast to standstill).
2. Controlled stop (the motor will be controlled and decelerated to standstill).
3. A warning will be indicated (the error window will open automatically).
4. A warning will be indicated (i.e. a warning will be entered into the error window, but
the error window will not be opened automatically).
Some errors are so severe that the user must not demote them to warnings or a certain
response is inevitable. In these cases, the user can select the option button, but the servo
positioning controller will correct the entry during the online parameterisation. During the
offline parameterisation, these reactions can be parameterised and saved in the
parameter set, but they will not be accepted by the servo positioning controller.