5 input configuration, Input configuration – Lenze 931E/K Small Drives Control User Manual
Page 44
Advertising
Commissioning
Torque control
Input configuration
l
44
SW−HB 13.0002−EN 4.1
5.3.5
Input configuration
Select the menu Parameters
W I/Os W Digital inputs and check if the analog input has been
configured correctly.
)
Note!
The analog inputs must not be configured as digital inputs. The selection
"AIN’s used as DIN’s" must not be set, otherwise, the analog setpoint cannot
be evaluated.
931e_214
Advertising