Lenze 931E/K Small Drives Control - Manual (Page 162)

Appendix
Communication interfaces
Control via the technology interface
10
l
162 SW−HB 13.0002−EN 4.1
Communication window for RS232 transfer
After selecting the menu items Options W Communication W Display communication
window (RS232), a window will appear, in which you can monitor communication via the
serial interface. The window is mainly designed for debugging purposes. This option is not
of interest for "standard users".
931e_338
10.2.3 Control via the technology interface
The 931E/K servo positioning controller has a technology interface which is equipped with
a synchronous serial interface.
This enables the integration of customer−specific extension modules/communication
interfaces.
If required, please contact your Lenze representative.