Lenze 931E/K Small Drives Control - Manual (Page 130)

Troubleshooting and fault elimination 9
l
130 SW−HB 13.0002−EN 4.1
)
Note!
ƒ The 931E/K servo positioning controller internally manages error numbers 1
to 64.
ƒ Please contact your Lenze representative, if your controller indicates an error
number that is not described in the error table and identified as an
unknown error in the chapter "Error management". (
¶ 132)
ƒ These error numbers may have been assigned as part of firmware
extensions or customer−specific firmware versions including additional
monitoring functions.