10 general configuration settings, Appendix – Lenze 931E/K Small Drives Control User Manual
Page 148
![background image](/manuals/566112/148/background.png)
Appendix
Parameterisation of outside motors
General configuration settings
l
148
SW−HB 13.0002−EN 4.1
10.1.10
General configuration settings
The possible display unit settings (basic configuration) depend on the basic configuration
selected under the menu Parameters
W Application parameters W General configuration.
Here, the following menu will appear. Use this menu to select the common drive
configuration:
931e_300
Use the Application field to select if your application is a rotary motion or a translatory
motion application.
If you want to select the output unit for your application, click the button in the Gearbox
field or the Settings button. After this, the menu Display units will appear. For more
information, please see the chapter "Display unit settings". (
¶ 149).
Application examples:
ƒ
Rotary with gearbox: Opening/closing of a gate.
ƒ
Translatory with feed constant: Positioning of a slide for transporting goods for
further processing.