Lenze 931E/K Small Drives Control - Manual (Page 133)

Appendix
Parameterisation of outside motors
Motor data
10
l
133 SW−HB 13.0002−EN 4.1
10 Appendix
10.1 Parameterisation of outside motors
10.1.1 Motor data
)
Note!
This menu must be activated, if the motor could not be identified by means of
the list.
Select the menu Parameters
W Device parameters W Motor data.
931e_206
Basic parameters
Use this menu to enter the maximum and the rated motor current. The data can be
obtained from the nameplate. The torque constant results from the quotient of rated
torque / rated current.